Automatic Applicator for Fingerlift Tape- Arataper
For multiple double sided tapes. High speed. High accuracy. Very quick and easy set up.
Installed a dedicated machine, ARAGLUER 1000, ARATAPER TA 130, or any existing folder gluer.
Developed and produced in Sweden
Arataper in compact triple version as double sided tape applicator
Automatic Applicator for Fingerlift Tape- Arataper- features:
- Control Systems and brackets for integration into existing folder gluers
- Application of tapes and tear strips from 4-30 mm width and from 35 mm length
- Speeds up to 30-40 000 tapings/Hr.
- Quick tape width and cut off length change
- Very accurate, fast and safe
- Application of reinforcement tapes and carrying (tape) handles
- Saves set up times, saves tape, do not spoil printing if applied prior to die cutting
- Less waste at start up and jams. Misplaced tapes can be easily removed and the box can be run again
- No burning hazard from expensive Hot Melt based alternative systems.
- Tape unwind for large spool rolls of 2500 m with quick change
- 1-6 applicators in one machine
Happy unboxing in short runs
- E-Commerce boxes in smaller series with customers own print is now possible.
- Reduce counterfeiting by using your own designed box
- Happy Unboxing with the help of the Automatic Applicator for Fingerlift Tape-Arataper
ARATAPER TA130-dedicated machine
Specially designed machine Arataper-TA130
Watch it run 2 fingerlift tapes onto N-Flute
Alignment
Watch the Arataper TA 130 machine applying 2 fingerlift tapes with alignment.
The Arataper TA130 aligns the box and applies the tape very exact so the glue free fingerlift edge can be gripped.
Here the Arataper is installed in our own base machine, the Aragluer. Watch it run fingerlift and tear strip trial in our workshop.
Spool -jumbo rolls of tape for longer runs without stop
Tape unwind for jumbo rolls with 2500 m of tape here equipped
with kick start for reducing the tension in tape. Other versions optional.
Arataper in a compact triple version for existing wide machines, here with a 2.4 m arm.
A test run at 100 M/Min of the wide triple version
Watch first trial of a triple applicator system at installation in Bobst Expertfold 170
Combo tape unwind for large and small tape rolls
Application from Single tape roll
Arataper installed in our own developed Aragluer 1000. Here with spring loaded start of the tape roll.
Arataper installed in a Jagenberg Diana 105 with a single spring loaded unwind
An installation in a Jagenberg Diana 165 with a spring loaded unwind
Watch 2 fingerlift tape + 1 tear strip on the top flap and
one reinforcement/securing tape at bottom flap
Reinforcement tape
Watch the difference without and with a reinforcement tape in the bottom on this E-flute box.
The tape makes the bottom better protected against Pilferage & Theft in comparison with Lock bottom.
This Feco 0215 box can be produced cheap in an inline machine.
Arataper mounted in a semi automatic machine
Arataper installed in one Bobst Domino 110
Running of a Carton for medical samples and home usage.
Application of narrow and short tapes is no problem.
The Arataper TA 130 can run 2 lanes at the same time
Below you can see it apply 25 mm long fingerlift tapes.
Watch a modified version making programmed cuts.
A tear strip on the inside opens the box. No need for window patcher. Cheaper and less plastic.
Watch a box with 2 double sided tapes and 2 tear strips
Many possibilities
There are many box types beside the traditional brown boxes .
Brown Boxes under the X-Mas tree?
Envelope with 3 tapes
Envelope with 3 tapes made by Arataper
Tray with 4 tapes